Non Metallic Mining Process Equipment Mechanical Flotation Cell
This flotation machine /flotation cells is applicable for the
separation of nonferrous metal and ferrous metal and nonmetal, such
as fluorite and talc.
When the impeller rotates, the pulp from the periphery is inhaled
between impeller blades through the groove bottom, at the same
time, the low pressure air from the air blower gets through the
hollow shaft into the air distributor in the impeller cavity, and
gets by the holes on the air distributor into the impeller blades,
after the pulp and air fully mixing between the impeller blades,
the discharge pulp coming from the upper half of impeller, is first
steadied and oriented by the stator on the inclined top of the
impeller then comes into the whole tanks.
1. Large air-absorption capacity
2. Low energy consumption
3. Less reagents consumption
4. Easy to maintenance and can be designed according to the users.
5. Every cell owns three functions: air absorption, slurry
absorption, and floatation separation, and the cells form a
floatation separation loop by itself without any auxiliary
equipment, and is allocated horizontally, which favors the change
6. The impeller has backward-inclined upper and lower vanes, which
produce upper and lower circulation of mineral slurry respectively.
|Effective volume (m3)||0.37||0.7||1.2||2.8||4||8|
|Impeller rotation (r/min)||352||400||312||268||238||191|
|Overall size (mm)|