Manual Run Dewatering Filter Press , Plate and Frame Filter Press
Water Recovery & Slurry Control Filter Press
Our company supply various series of filter presses, including
chamber filter press, plate and frame filter press, stainless steel
filter press, lab type filter press, automatic filter press, water
washing filter press, cast iron filter press, vertical filter
Manual Plate and Frame Filter Press
The Manual Filter press is working for the purpose of solid-liquid
separation. It is a low cost filtration option suitable for small
tonnages and long filtration cycle times where manual labour is
available to open the press and discharge the solids.
Advantages of Manual Filter Press:
The filter press frame is made from solid steel, which can support
the total weight of filter press plates and the pressure caused
Resists of corrosion
Long service time
This manual filer press with rigid structure, smooth operation and
High filtering accuracy: sludge dewatering machine uses different
structural belts according to various materials to improve
Applications of Manual Filter Press:
Filter press is used for solid~liquid separation of various
suspending liquid in intermittent pressure filtration. Filter
plates are pressed by pressing devices and suspending liquid is
pumped into the filter chamber. Solid particles and liquid are
separated through filtrating media (filter cloth).
Filter presses generally work in a "batch" manner. The term "batch"
refers to the fact the cycle must be stopped to discharge the
collected "filter cake" prior to restarting a cycle. "Pressure" is
created by the feed pump in the separation process.
The plates are clamped together, then a pump starts feeding the
slurry into the filter press to complete a filtering cycle and
produce a batch of solid filtered material, called the filter cake.
The stack of plates is opened, solid is removed, and the stack of
plates is re-clamped and the filtering cycle is repeated.
The process of one batch filtration is:
pressing -- feeding material – filtering -- discharging cake.
Closing of the filter plates: when start the press button on the
PLC control cabinet,the moving head plates will be activated by the
hydraulic clamping the plates.
Filling: The sludge (or slurry) will be pumped into the chamber one
by one. When all chambers are full off filter cake, the filtration
Filter opening: The moving head is drawn back to disengage the
first filtration chamber. The cake falls will drop from the plates
|Plate number (pcs)||Chamber volume(L)|
|Length (mm)||Width (mm)||Height (mm)|