Flotation Cell Beneficiation Plant Wear Resistance For Molybdenum
Application of Flotation machine,Flotation Metal Separator :
The mineral froth Flotation machine is widely used for roughing,
concentrating and counter-flotation of nonferrous metal that
includes copper, lead, zinc, nickel and molybdenum, ferrous metal
and nonmetallic mineral.
Our Flotation Machine's Advantages:
1. With a light structure,it's easy to install the bearing body
with a good perpendicularity.
2. Wear resistance,long service life and powerful agitating force.
3. U-shaped tank reduces the ore accumulated at the bottom of the
4. With light main shaft parts and the stator installed at the
bottom of the tank,it's easy to install them.
How flotation machine works?
When gold ,lead ore, copper ore flotation machine works, slurry is
inhaled from the bottom of the trough to the space between
impellers. Meanwhile, the low pressure air send by fan is sent to
this area through the air distributor in the hollow shaft. After
sufficient mixing, the slurry is pushed out by the impeller, and
then goes to the whole trough.
When the froth rises to the stable level, after the enrichment
processing, froth overflows to the froth trough from the overflow
weir. Another part of ore slurry flows to lower part of impeller
for the re_mis with air. The remained slurry flows to the next
trough until becomes residue.
Specifications of Flotation Machine
|Model||Effective capacity (m3)|
|Impeller Rotation (r/min)||Blower Pressure (kPa)|
Max. inflating volume
|Motor Power kw|
Single Tank Weight
|XCF-1||1||0.2～1||400||358||≥12.6||2||5.5||1.1||1154||Need to be inflatable, self-absorp ore pulp and proceed levels set,
no need foam pump|